Smeg K24X90 - Technical Specifications; Dimensions and Weight; Air Extraction and Noise; Electrical Requirements

MOTOR
ID090512
Code K24X90
K24X90
smeg 90cm wallmount rangehood
COMMERCIAL ONLY PRODUCT
WARNING: technical specications and product sizes can be varied by the manufacturer
without notice. Cutouts for appliances should only be by physical product measurements.
The above information is indicative only.
PLEASE NOTE: drawings are not to scale. They are to assist only.
180
min 110/190 – max 1140
power cord 0.85 metres
controls:
forward, centre
SIDE ELEVATION
min 110/190
CHIMNEY PLAN
280
36
min 890 - max 1140
420
recircuation
180
200
900
500
min110
max 440
180
2
00
m
in110
m
ax440
600
500
280
36
min 810 - max 1140
420
DIRECT
DUCTING
900
height 810mm min, 1140mm max (direct duct)
width 600mm
depth 500mm
packaged
dimensions
975mm x 460mm x 620mm = 0.278m³
weight 12.8kg net, 16.8kg gross
air extraction 510m³/hr net, 683m³/hr gross
noise rating 44–60 dBA
electricity supply 240 volt, 50 Hz
electrical
connection
connected power cord with 3-pin plug suitable for standard
10 amp GPO
power cord
length
85 cm
wattage motor 135 watts
lights(2) 40 watt SES tubular each
total 215 watt
current 0.9 amp
air exit aperture 150mm diameter
NB: a 150/125mm diameter adaptor is supplied
duct to
atmosphere
150mm or 125mm duct pipe required
supplied • instructions for installation, operation and maintenance
• screws for wall mounting
• recirculation panel (optional use)
• one-way 150mm diameter buttery valve (optional use)
• 150mm –125mm diameter air exit aperture collar adaptor