Need help?Do you have a question about the Smeg KTS75 and is the answer not in the manual?
General| Motor power | 240 W |
|---|---|
| Noise level | 42 dB |
| Number of speeds | 4 |
| Type of extraction | Recirculating |
| Maximum extraction power | 800 m³/h |
| Type | Wall-mounted |
| Control type | Buttons |
| Product color | Silver |
| Housing material | Stainless steel |
| Number of filters | 1 pc(s) |
| Bulb type | Halogen |
| Number of bulbs | 2 bulb(s) |
Weight and Dimensions| Depth | 745 mm |
|---|---|
| Width | 756 mm |
| Height | 732 mm |
Attach the glass panel with the SMEG logo, centering hinges in seats, and slide downwards.
Attach the glass panel without logo, centering pins in seats, and slide into place.
Follow the installation steps in reverse order to safely remove the glass panels.
Use the supplied key, place it correctly, and insert prongs into the panel holes.
Turn the key downwards, pull the panel, and then lift upwards to remove.
Bring panels close to the hood and insert filter pins into the designated seats.
Rotate the panels and move them close to the hood to complete installation.
Loosen/tighten adjustment screws on LH and RH sides using a size-3 Allen key.
Fix the hood in the center over the hob, maintaining specified distances.
To Next Page
