EasyManua.ls Logo

Smeg KI90X - User Manual

Smeg KI90X
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Libretto di Istruzioni
Instructions Manual
Manuel d’Instructions
Bedienungsanleitung
Gebruiksaanwijzing
Manual de instrucciones
Manual de Instruções
Руководство по эксплуатации
Bruksanvisning
Brugsvejledning
KI90X
Question and Answer IconNeed help?

Do you have a question about the Smeg KI90X and is the answer not in the manual?

Summary

Recommendations and Suggestions

Installation Recommendations

Manufacturer liability, minimum safety distance, voltage check, earthing, flue connection, ventilation requirements.

Usage Guidelines

Domestic use only, avoiding naked flames, managing fryers, safety for persons with reduced capabilities, supervision of children.

Maintenance Advice

Switching off appliance, filter cleaning/replacement, hood cleaning using damp cloth and detergent.

Product Characteristics

Component Identification

Lists product components with reference numbers, quantities, and names, including hood canopy, chimneys, panels, flanges, dumpers, connectors.

Installation Components List

Lists components required for installation, including brackets, wall plugs, screws, washers, nuts, and drilling template.

Documentation Included

Details the documentation provided with the product, specifically the Instruction Manual.

Appliance Dimensions

Installation Procedure

Ceiling;Shelf Drilling and Frame Fixing

Using plumb line, drilling template, marking holes, drilling for different ceiling types, inserting screws and plugs.

Frame and Chimney Assembly

Adjusting frame height, securing it, fixing telescopic chimney bracket, ensuring frame stability.

Duct Connections

Connecting hood to chimney for ducted version using pipes of ø 150 or 120mm, installing reducer flange.

Recirculation Air Outlet Setup

Inserting connector extensions, fixing support bracket, aligning outlets, connecting to canopy, fitting charcoal filter.

Novastick Tape Application

Applying Novastick tape to the front edge of the Upper Chimney from top part down to the start of the Lower Chimney.

Panel and Hood Canopy Fitting

Removing filters, fixing hood canopy to frame with screws, attaching panel to rubber supports.

Electrical Connection

Connecting hood to mains via two-pole switch, ensuring correct cable connector insertion into socket.

Operating the Appliance

Control Panel Functions

Describes buttons (T1, T2, T3, L) and their LED functions for motor speed control and lighting system operation.

Appliance Maintenance

Grease Filter Cleaning

Cleaning frequency, method of removal, washing in dishwasher, drying, and refitting filters.

Activated Charcoal Filter Replacement

Replacement frequency, removal of saturated filter, fitting new filter, refitting grease filters.

Light Bulb Replacement

Removing snap-on cover, removing halogen lamp, replacing lamp, replacing cover.

Summary

Recommendations and Suggestions

Installation Recommendations

Manufacturer liability, minimum safety distance, voltage check, earthing, flue connection, ventilation requirements.

Usage Guidelines

Domestic use only, avoiding naked flames, managing fryers, safety for persons with reduced capabilities, supervision of children.

Maintenance Advice

Switching off appliance, filter cleaning/replacement, hood cleaning using damp cloth and detergent.

Product Characteristics

Component Identification

Lists product components with reference numbers, quantities, and names, including hood canopy, chimneys, panels, flanges, dumpers, connectors.

Installation Components List

Lists components required for installation, including brackets, wall plugs, screws, washers, nuts, and drilling template.

Documentation Included

Details the documentation provided with the product, specifically the Instruction Manual.

Appliance Dimensions

Installation Procedure

Ceiling;Shelf Drilling and Frame Fixing

Using plumb line, drilling template, marking holes, drilling for different ceiling types, inserting screws and plugs.

Frame and Chimney Assembly

Adjusting frame height, securing it, fixing telescopic chimney bracket, ensuring frame stability.

Duct Connections

Connecting hood to chimney for ducted version using pipes of ø 150 or 120mm, installing reducer flange.

Recirculation Air Outlet Setup

Inserting connector extensions, fixing support bracket, aligning outlets, connecting to canopy, fitting charcoal filter.

Novastick Tape Application

Applying Novastick tape to the front edge of the Upper Chimney from top part down to the start of the Lower Chimney.

Panel and Hood Canopy Fitting

Removing filters, fixing hood canopy to frame with screws, attaching panel to rubber supports.

Electrical Connection

Connecting hood to mains via two-pole switch, ensuring correct cable connector insertion into socket.

Operating the Appliance

Control Panel Functions

Describes buttons (T1, T2, T3, L) and their LED functions for motor speed control and lighting system operation.

Appliance Maintenance

Grease Filter Cleaning

Cleaning frequency, method of removal, washing in dishwasher, drying, and refitting filters.

Activated Charcoal Filter Replacement

Replacement frequency, removal of saturated filter, fitting new filter, refitting grease filters.

Light Bulb Replacement

Removing snap-on cover, removing halogen lamp, replacing lamp, replacing cover.

Smeg KI90X Specifications

General IconGeneral
Width90 cm
LightingYes
Control TypeElectronic
Number of speeds3
Lighting TypeHalogen
Number of lights2
Grease Filter TypeAluminium
Number of Motors1
MaterialStainless steel
FiltersAluminum grease filters
Filter TypeAluminum grease filters
TypeWall-mounted chimney

Related product manuals