EN
To disable the DELAY press the button again or stop the motor.
• RESET FILTRI:
Resets the filter saturation alarm if pressed for 2s when all the loads
(motor+lights) are off.
• If there is a metal Filter sat. alarm, FF appears on the display, after 100 h
of operation.
• If there is a CA filter alarm, EF appears on the display after 200h of
operation.
• REDUCE LIGHT INTENSITY
• LIGHTS ON/OFF
Turns the hood lights on and off at maximum intensity. The
increase/reduce buttons adjust the lights’ intensity by 4 steps, excluding
max. intensity.
• INCREASE LIGHT INTENSITY
To Next Page
