Smeg KLT9L4X - Page 5

17
Instructions for use
9-button control panel
_______________________________________________________
A) Shutdown timer
B) Speed selection
C) Turbo function
D) 24h air exchange function
E) Automatic switch-off
F) Filter alarm reset
G) Light brightness adjustment
Light colour temperature adjustment
Hob and hood connection
Touch Technology
_______________________________________________________
The unit uses capacitive sensors to detect the touch of the button
on the front glass panel.
Lighting
_______________________________________________________
When power is turned on, the unit will be in the off mode. Only the
button is illuminated (low brightness). After touching the
button, the unit will go into Stand-By mode and all buttons will be
dimly lit. In Stand-by mode, the user can activate any function that
is allowed by the operating logic. The button of the active function
will be brightly lit.
EN
EN