21
Instructions for use
Hob and hood connection
_______________________________________________________
Automatic operation specifications – Auto-Vent 2.0
Some models are provided with a wireless communication system to
allow them to be controlled automatically via an induction hob.
Automatic switch-on
When the hob is switched on, the hood switches on if it is in
STANDBY mode (all buttons illuminated at low brightness).
Operation in automatic mode
Automatic mode of operation is shown on the hood user interface
as follows.
For example, if the fan motor is operating at speed 2 and the
appliance is in automatic mode:
every 5 seconds
500 ms later
Automatic switch-off
When the hob is switched off, the hood switches to STANDBY mode
(all buttons illuminated at low brightness).
EN
EN
To Next Page
Loading...
