What to do if my Smeg Washer does not start?
If your appliance isn't starting, make sure the plug is properly connected to the socket, the door is securely closed, and the “Start/Pause” button has been pressed.
Why is my Smeg Washer not spinning?
The anti-imbalance safety device may have tripped because the laundry is not evenly distributed in the drum. If laundry is still wet at the end of the cycle, rearrange it in the drum by hand and repeat the spin programme only.
How to fix no water filling in my Smeg LBI147 Washer?
If your washer isn't filling with water, verify these items: 1. The plug is properly connected to the socket. 2. The door is securely closed. 3. The water tap is turned on. 4. The water intake hose filters are not blocked. 5. The water intake hose is not trapped or kinked.
What to do if water not pumped out of my Smeg Washer?
If the water is not pumping out, check that the drain hose is not kinked and that the drain pump is not blocked.
Why is there water on the floor near my Smeg Washer?
If you find water on the floor, examine the water intake hose fittings to ensure they are not loose. Also, check that the end of the drain hose is correctly positioned. Finally, make sure the detergent drawer siphons are correctly fitted and not blocked.
Why is my Smeg LBI147 Washer vibrating so much during spins?
Strong vibrations during spins can occur if the appliance is not properly leveled. Check if the washing machine is too close to walls or kitchen units. Also, verify that the internal unit on flexible mounts is locked in position.
Why is my Smeg LBI147 Washer taking in and pumping out water continually?
If your washer is continuously taking in and pumping out water, check that the end of the drain hose is not positioned too low.
Why is there too much foam in my Smeg LBI147?
Too much foam indicates that the detergent used is not recommended for automatic washing machines or that the quantity used exceeds the amount stated in the manual.
Why is my laundry not properly spun in Smeg LBI147 Washer?
If laundry is not properly spun, it may be because large items are screwed up and not evenly distributed within the drum. Always wash a mix of large and small items.
Why are there traces of detergent on my laundry after washing in my Smeg LBI147?
Many phosphate-free detergents contain substances with low water solubility. Select the Rinse programme or brush the laundry.
General| Colour of products | White |
|---|---|
| Built-in display | Yes |
| Door colour | White |
| Washing capacity | 7 kg |
| Capacity | 7 kg |
| Spinning speed | 1400 RPM |
| Spin-drying class | B |
| Washing class | A |
| Delayed start timer | Yes |
| Color | White |
| Loading type | Front-load |
| Delay start (max) | 24 h |
To Next Page
