What to do if my Smeg LVS139SX Dishwasher shows error E5?
If your Smeg dishwasher displays error code E5, first ensure that your water connections are correctly installed and that the water intake tap is fully open. Also, inspect the filter to make sure it is clean and free from any blockages. If the issue continues, contact the after-sales service.
How to fix error E6 on Smeg LVS139SX Dishwasher?
If your Smeg dishwasher displays error code E6, check the drain hose to ensure it is not bent, pinched, or obstructed. Also, verify that the siphon and filter are free from debris and not clogged. If the problem persists, contact the after-sales service.
What to do if Smeg Dishwasher shows E2 error?
If your Smeg dishwasher is showing error code E2, it means the water level limiting system has tripped. To resolve this, interrupt the current program and turn off the dishwasher. Then, turn it back on, reprogram it, and start the wash cycle again. If the error continues, contact the after-sales service.
Why is E3 error appearing on my Smeg LVS139SX Dishwasher?
If your Smeg dishwasher displays error code E3, it indicates that the water is not heating correctly. Try running the wash program again. If the problem continues, contact the after-sales service.
General| Capacity | 13 place settings |
|---|---|
| Control panel colour | Stainless steel |
| Delayed start timer | Yes |
| Child Lock | Yes |
| Color | Stainless steel |
| Drying system | Condensation drying |
| Washing programs | Eco, Normal, Rapid |
To Next Page
