Instructions for the Installer
29
12.2 Positioning the oven
The appliance is designed for building-in to cabinets made from any heat-
resistant material. Comply with the dimensions shown in following pictures.
When installing in tall units bear in mind that the top/rear of the unit must
have an opening 100 mm deep.
EN
• Push oven completely
into the cabinet and
centre it.
• Open microwave door
and fasten the appliance
to the cabinet using the
four screws provided.
380-382
m
i
n
5
6
8
365-372
m
i
n
5
6
8
4x