1
2
3
4
5
Required accessories to be ordered separately:
Central connection Kit
Special side proles and aluminum covering frames are provided for
closing gaps between the appliance and the adjacent cabinets.
Operate as follows:
Position the appliances in front of the installation area, leaving
enugh space to operate at their back
1
.
Move at the back of the appliances to mount the joining brackets:
x on side of the top and lower brackets to one of the appliances
and subsequently to the other
2
.
Place the two units side by side and join them at the front attaching
the two pro les with the supplied screws
3
.
Attach the bracket on top of the units as per gure
4
.
Finish off by mounting the central cover frame onto the central
profiles, by pushing it until a click is heard
5
.
Built-in installation two or more appliances
Series: Integrated
To Next Page
Loading...
