Smeg S64SN - Page 26

Installation
64
6. Remove the front panel by lifting it
towards the right.
7. Remove all the burners from the hob.
8. Unscrew the screws under each burner
to remove the fixing plate.
9. Remove the gasket on each burner's
thermocouple and igniter.
10. Remove the top.
Removing the hob top (models with
integrated control panel)
1. Remove the grids from the hob.
2. Remove the knobs by pulling them
upwards.
3. Remove all the burners from the hob.
4. Unscrew the screws under each burner
to remove the fixing plate.
5. Remove the gasket on each burner's
thermocouple and igniter.
6. Remove the top.