Smeg SA37X - COOKING IN TWO STAGE

10
COOKING IN TWO STAGE
When you press Start button, the M/W1 indicator starts blinking to show the oven is cooking.
At the end of ONE STAGE cook, the oven will beep and start TWO STAGE cook.
The M/W2 indicator starts blinking.
When TWO STAGE cook ends, you will hear 3 beeps.
1. Press Power button. (Select
the desired power level.)
2. Turn the DIAL KNOB to adjust
the first cooking time.
3. Press Power button. (Select
the desired power level.)
4. Turn the DIAL KNOB to adjust
the second cooking time.
5. Press Sart button.
The M/W 1 indicator appears and the display
will show what you selected.
This example shows power level 6.
The display will show what you selected.
The MW 2 indicator appears and the display
will show what you selected.
This example show power level 3.
The display will show what you selected.
NOTE: Press More or Less to add or subtract 10 seconds of cooking time during countdown.
NOTE: If step 1 is omitted, the oven will
cook at full power.
NOTE: Your oven can be programmed for
99 minutes 00 seconds.(99:00)
Power
X 5
Power
X 8
SA37X(¿ )-1B4K9S 02.9.3 11:38 AM ˘`10