Smeg SC485N-8 User Manual

65
Contents
INSTRUCTIONS FOR THE USER: these contain user advice, description of
the commands and the correct procedures for cleaning and maintenance
of the appliance.
INSTRUCTIONS FOR THE INSTALLER: these instructions are intended for
the qualified technician who must perform the installation, put it into
operation and test the appliance.
1. INSTRUCTIONS FOR USE ......................................................................... 66
2. SAFETY PRECAUTIONS ............................................................................ 68
3. ENVIRONMENTAL RESPONSIBILITY ........................................................ 70
4. GET TO KNOW YOUR OVEN...................................................................... 71
5. AVAILABLE ACCESSORIES ....................................................................... 72
6. USING THE OVEN ...................................................................................... 79
7. COOKING WITH THE OVEN....................................................................... 95
8. CLEANING AND MAINTENANCE ............................................................. 105
9. EXTRAORDINARY MAINTENANCE ......................................................... 117
10. INSTALLING THE APPLIANCE ................................................................. 123

Smeg SC485N-8 Specifications

General

Brand	Smeg
Model	SC485N-8
Category	Oven
Language	English

Summary

1. INSTRUCTIONS FOR USE

2. SAFETY PRECAUTIONS

6. USING THE OVEN

6.1 Before using the appliance

6.3 Warnings and general advice for usage

Provides crucial advice like keeping the door closed during cooking and how to prevent steam issues.

6.6 First use

6.7 Selecting a cooking function

Instructs on how to select cooking functions, including preheating, and modifying preset temperatures.

6.8 Using the timer

6.9 Programmed cooking

Covers semi-automatic and automatic cooking modes, including setting durations and start/end times.

7. COOKING WITH THE OVEN

7.1 Cooking advice and instructions

7.3 Cooking process information table

8. CLEANING AND MAINTENANCE

8.1 Cleaning stainless steel

8.4 Cleaning the door glazing

8.5 Cleaning the inside of the oven

8.7 Pyrolysis: automatic oven cleaning (on some models only)

Explains the pyrolysis cleaning process, including pre-start checks and setting the cleaning cycle duration.

8.8 VAPOR CLEAN: assisted oven cleaning (on some models only)

Describes the VAPOR CLEAN assisted cleaning procedure, including preparation and setting the cycle.

9. EXTRAORDINARY MAINTENANCE

9.1 Replacing the light bulb

9.2 Removing the door

Details methods for removing the oven door using movable levers or pins for cleaning or maintenance.

9.4 Removing the internal glass panels

9.5 What to do if...

Troubleshooting guide for common oven issues like display off, no heat, or unresponsive controls.

10. INSTALLING THE APPLIANCE

10.1 Electrical connection

Specifies requirements for connecting the appliance to the power supply, including grounding and cable type.

10.2 Cable replacement

10.3 Positioning the oven

Details the correct placement and mounting of the oven within furniture, including dimensions and clearances.