Cleaning and maintenance
65
• Pour approx. 40 cc of water onto the
floor of the oven. Make sure it does not
overflow out of the cavity.
• Spray a water and washing up liquid
solution inside the oven using a spray
nozzle. Direct the spray against the side
walls, upwards, downwards and
towards the deflector.
• Close the door.
Vapor Clean setting
1. Select the symbol using the function
knob.
2. The duration and temperature of the
cleaning cycle will appear on the
display.
3. Press the temperature knob to start the
cycle.
4. A buzzer will indicate the end of the
Vapor Clean cycle.
We recommend spraying approx.
20 times at the most.
If the internal temperature is
greater than that required for the
Vapor clean function, the cycle will
be stopped immediately and
STOP will appear on the display.
Let the appliance cool down
before activating the assisted
cleaning cycle.
The temperature and time
parameters cannot be modified by
the user.
To Next Page
Loading...
Need help?
General
