Cleaning and maintenance
66
End of the Vapor Clean cycle
1. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
2. Use an anti-scratch sponge with brass
filaments on tougher encrustations.
3. In case of grease residues use specific
oven cleaning products.
4. Remove the water left inside the oven.
For improved hygiene and to avoid food
being affected by any unpleasant odours,
we recommend that the oven is dried using
a fan assisted function at 160°C for
approximately 10 minutes.
4.10 Extraordinary maintenance
Replacing the internal light bulb
1. Unscrew bulb protector 1, anticlockwise.
2. Replace the bulb 2 with one of the same
type (25W). Use only oven bulbs (T
300°C).
3. Re-fit bulb protector 1.
We recommend wearing rubber
gloves for these operations.
For easier manual cleaning of the
parts difficult to reach, we
recommend removing the door.
Live parts
Danger of electrocution
• Unplug the appliance.
To Next Page
Loading...
Need help?
General
