Cleaning and maintenance
28
4.11 Extraordinary maintenance
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the racks/trays support frames.
3. Remove the bulb cover using a tool (e.g.
a screwdriver).
Incandescent lamps:
4. Unscrew and remove the lamp.
5. Replace the lamp with one of the same
type (25W).
6. Refit the cover correctly, so that the
moulded part of the glass is facing the
door.
7. Press the cover completely down so that
it attaches perfectly to the bulb support.
Halogen lamps:
8. Slide out and remove the lamp.
9. Replace the lamp with one of the same
type (40W).
10. Refit the cover correctly, so that the
moulded part of the glass is facing the
door.
11. Press the cover completely down so
that it attaches perfectly to the bulb
support.
Live parts
Danger of electrocution
• Disconnect the oven power supply.
Do not touch the halogen lamp
directly with your fingers, but wrap
it in an insulating material.
To Next Page
Loading...
Need help?
General
