What to do if my Smeg SIM571B shows F42 or F43 error?
If your Smeg Cooktop displays error code F42 or F43, it indicates that the sensor has detected a discrepancy between the appliance voltage and the mains supply voltage. To resolve this, disconnect the hob from the mains and check the electrical connection.
Why does my Smeg Cooktop keep turning off and beeping?
Your Smeg Cooktop might be beeping and switching off every 30 seconds because water or utensils are on the control panel. To stop this, clean the control panel.
What to do if Smeg SIM571B displays C81, C82, C83?
If your Smeg Cooktop displays error codes C81, C82, or C83, it means the internal temperature of the electronic parts is too high. Allow the hob to cool down completely before using it again.
General| Type | Induction |
|---|---|
| Number of Cooking Zones | 5 |
| Control Type | Touch |
| Power Levels | 9 |
| Total Power | 7400 W |
| Boost Function | Yes |
| Color | Black |
| Safety Features | Child Lock, Overheating Protection |
| Width | 71 cm |
| Material | Glass |
To Next Page
