Method 2
1. Use four ST4*8mm screws to fix the mounting bracket onto the hood. Then
put two ST4*30mm screws into the wall. Hang the hood onto the wall.
2. Use eight ST4*14mm screws to fix the hood onto the cabinet from the
sides.
Method 3
1. Use four ST4*8mm screws to fix the mounting bracket onto the hood. Then
put two ST4*30mm screws into the wall. Hang the hood onto the wall.
2. Use four M4*35mm screws, eight washers and four nuts to fix the hood
onto the cabinet from the top.
And then connect the ducting pipes to the outlet. Install the lamps and filter
back to the hood.
4
To Next Page
Loading...
