EasyManua.ls Logo

Smeg ST332L - User Manual

Smeg ST332L
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Contents
1
1. Description of the controls _______________________________ 2
2. Operating instructions __________________________________ 16
3. Cleaning and maintenance ______________________________ 31
4. Troubleshooting ______________________________________ 35
Thank you for choosing one of our products.
You are advised to read this manual carefully; it contains all the
information you need use your dishwasher safely, correctly and in the
most satisfactory manner.
Following the cleaning instructions provided here will keep your
dishwasher's performance at peak levels in the long term.
USER INSTRUCTIONS: these consist of recommendations for using the
appliance, a description of its controls and of the correct cleaning and
maintenance procedures.
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Smeg ST332L o cerca il
tuo prodotto tra le migliori offerte di Lavastoviglie

Questions and Answers

  • R
    Robert SanfordAug 11, 2025
    What to do if my Smeg ST332L has a water pump-out malfunction?
    • F
      flozanoAug 11, 2025
      If your Smeg dishwasher is not pumping out water, verify that the drain hose isn't kinked or crushed and that the siphon and filter aren't blocked. If the problem continues, contact the after-sales service.
  • C
    Carla ColeAug 16, 2025
    Why is my Smeg ST332L not taking in water?
    • D
      Dennis AndersonAug 16, 2025
      If your Smeg dishwasher isn't taking in water, make sure the water connections are correct, the water intake tap is on, and the filter isn't dirty. If the issue continues, contact the after-sales service.
  • A
    Alejandro RivasAug 22, 2025
    What to do if my Smeg dishwasher shows a safety level error?
    • C
      Christopher DanielAug 22, 2025
      If your Smeg dishwasher displays a safety level issue, interrupt the current program and turn off the dishwasher. Then, turn it back on, set the program again, and start the wash cycle. If the problem remains, contact the after-sales service.
  • G
    Glenda KaiserAug 28, 2025
    What to do if my Smeg ST332L has water temperature monitoring malfunction?
    • K
      Kathryn JamesAug 28, 2025
      If your Smeg dishwasher has a water temperature monitoring malfunction, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service.
  • C
    Craig SmithSep 3, 2025
    What to do if my Smeg dishwasher is not heating water?
    • M
      Mr. Samuel BurnsSep 3, 2025
      If your Smeg dishwasher is not heating water, repeat the washing program. If the issue continues, contact the after-sales service.

Smeg ST332L Specifications

General IconGeneral
BrandSmeg
ModelST332L
CategoryDishwasher
LanguageEnglish

Related product manuals