User instructions
12
Some models feature additional options, activated by pressing two
buttons simultaneously. In this case, two lines in the control panel
graphics link the symbol of the additional option to the two buttons to be
pressed simultaneously to enable it. (e.g. “Flexi Tabs” in this illustration)
Select this option together with any washing program (except the soak
program) to SHORTEN the cycle. To activate this option, press button (light
comes on) after selecting the program required.
The option is automatically deactivated at the end of the program.
This option further reduces energy consumption by opening the door at
the end of the cycle for more effective drying. At the end of the wash an
automatic device releases the door, which slowly opens by a few
centimetres. This allows optimal drying even with low rinsing
temperatures, for significant energy saving.
The dishwasher remains in an idle state between the rinse stage and the
end of the cycle to allow proper drying (the display shows the time left until
the end of the cycle). Opening the door at this stage causes the cycle to
stop and ends the program.
The program end is signalled by a short beep and the flashing of the
indicator lights for programs 4 and 5.
is activated automatically if the selected program is
compatible with the option. It can be deactivated before the program is
started.
When the function is activated, opening of the door
in any way; do not leave anything in the necessary space in front of the
door to allow it to open. Do not force the door lock before the end of the
cycle is signalled, as this would damage the mechanism.
To Next Page
Loading...
Need help?
General
