What to do if my Smeg ST8246U has a water intake malfunction?
If your Smeg Dishwasher experiences a water intake malfunction, first ensure that the water connections are correctly installed. Check that the water supply tap is fully open and verify that the filter is not clogged. If the issue continues after checking these items, contact the technical assistance service.
What to do if the Smeg ST8246U Dishwasher indicates a safety level issue?
If your Smeg Dishwasher indicates a safety level issue, interrupt the current program. Then, switch off the dishwasher, switch it back on again, program a new cycle, and press start. If the problem persists, contact the technical assistance service.
What to do if Smeg Dishwasher has a water temperature monitoring malfunction?
If your Smeg Dishwasher has a water temperature monitoring malfunction, interrupt the current program. Switch off the dishwasher, switch it back on again, program a new cycle, and press start. If the problem continues, contact the technical assistance service.
Guides on selecting programs, starting, stopping, and managing wash cycles.
Details dishwasher malfunctions indicated by indicator lights and error codes (E1-E9).
Covers essential safety instructions, appliance intended use, and installation compliance.
Details warnings related to power supply, earthing, and appliance handling.
Covers safety during installation, technician requirements, and building-in guidelines.
Details precautions for water supply connection and electrical safety.
Explains earthing, cord replacement, and correct plug fitting for safe operation.
Guides on selecting programs, starting, stopping, and managing wash cycles.
Details dishwasher malfunctions indicated by indicator lights and error codes (E1-E9).
Covers essential safety instructions, appliance intended use, and installation compliance.
Details warnings related to power supply, earthing, and appliance handling.
Covers safety during installation, technician requirements, and building-in guidelines.
Details precautions for water supply connection and electrical safety.
Explains earthing, cord replacement, and correct plug fitting for safe operation.
General| Built-in display | Yes |
|---|---|
| Delayed start timer | Yes |
| AquaStop function | Yes |
| Half Load Option | Yes |
| Number of Place Settings | 14 |
| Control panel colour | Silver |
| Inlet hose length | 1.5 m |
| Drying system | Condensation drying |
| Delayed start | 24 h |
| Color | Silver |
To Next Page
