Smeg SWM65 - Page 32

FAILURE CODE
FAILURE
INDICATOR
PROBABLE
FAILURE
THE PROCESS
TO BE DONE
E09
The 1,2 and 4
number light
blink.
The network
voltage is too
high or too
low.
If the network
voltage is lower
than 150V or
higher than
260V, your
machine will
automatically
stop. When the
network voltage
is recovered,
your machine
will continue its
operation.
E10
The 1,3 and 4
number light
blink.
Communication
error
.
Shut down your
machine and
unplug. Turn off
the tap and
apply to the
nearest
authorized
service.
31