EasyManua.ls Logo

Smeg UD7108FSEP - Troubleshooting

Smeg UD7108FSEP
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C AB
2.
Clean the ventilation grid. (Refer to
"Cleaning the ventilation filter ". )
3.
Carefully pull the air deflector out (C),
checking that there is no water left from
the defrosting.
4.
Clean the lower part of the appliance
with a vacuum cleaner.
Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
1. Disconnect the appliance from
electricity supply.
2. Remove all food.
3. Defrost (if necessary) and clean the
appliance and all accessories.
4. Leave the door/doors open to prevent
unpleasant smells.
WARNING! If the cabinet will be
kept on, ask somebody to
check it once in a while to
prevent the food inside from
spoiling in case of a power
failure.
TROUBLESHOOTING
WARNING! Refer to Safety
chapters.
What to do if...
Problem Possible cause Solution
The appliance does not oper-
ate.
The appliance is switched off. Switch on the appliance.
The mains plug is not con-
nected to the mains socket
correctly.
Connect the mains plug to
the mains socket correctly.
There is no voltage in the
mains socket.
Connect a different electrical
appliance to the mains sock-
et. Contact a qualified electri-
cian.
The appliance is noisy. The appliance is not suppor-
ted properly.
Check if the appliance stands
stable.
Audible or visual alarm is on. The cabinet has been recent-
ly switched on or the temper-
ature is still too high.
Refer to "Door Open
Alarm"or "High Temperature
Alarm".
The temperature in the appli-
ance is too high.
Refer to "Door Open
Alarm"or "High Temperature
Alarm".
23