Factors that affect this include water type, humidity, temperature, and air currents.
The amount and intensity of mist produced will vary, but this is not unusual and
should not be considered as a fault.
Operation of the Device
1. Insert the plug of the DC supply into
the socket on the back of the unit.
2. Position the unit on a flat and hard
surface (no rug or soft towel
underneath). Remove the upper
cover from the base.
3. Fill the tank with tap/distill water
with measuring cup up to 350ml.
Each measuring cup has 100ml
capacity.
4. Add few drops of essential oil into
the water. (Fill water first before
adding essential oils) Around 3
drops per 100ml of water is
optimum.
To Next Page
Loading...