To Next PageTo Next Page
Need help?Do you have a question about the Smith & Nephew DOUBLEFLO and is the answer not in the manual?
Details the components of the arthroscopy system, including accessories and consumables.
Defines the intended users and patient types suitable for the DOUBLEFLO system.
Details the system's purpose for fluid distension, irrigation, and suction during arthroscopy.
Explains symbols used in the manual and on the pump for safety and identification.
Provides critical warnings about device misuse, maintenance, and handling to prevent injury.
Details sterilization methods and essential electrical specifications of the pump.
Describes the front panel indicators and controls of the DOUBLEFLO pump.
Details the connectors and identifiers located on the back panel of the DOUBLEFLO pump.
Explains the purpose and usage of the Day Tube Set and Patient Tube Set.
Describes the Inflow and Outflow Tube Sets, their function, and single-use requirement.
Introduces the wired footswitch and its control functions for the pump.
Details the Foot Control Interface (FCI) and Hand Control Interfaces (HCI) for shaver control.
Explains the wireless remote control and the AC power cord for pump operation.
Describes the sounds the pump makes to indicate status changes or actions.
Explains the meaning of illuminated LEDs on the pump for different operational states.
Details how the pump displays errors and the necessary actions to resolve them.
Advises on safe handling and what to do if the device is dropped or damaged.
Outlines pre-use inspection steps to ensure the pump and system are ready for operation.
Instructions for positioning the pump correctly relative to the patient.
Details the aseptic method for connecting the Day Tube Set and Patient Tube Set.
Instructions for connecting the wired DOUBLEFLO footswitch to the pump.
Guidance on ensuring remote control functionality and its use in sterile environments.
Details connecting the S+N Pump/Shaver Interface Cable to the pump and shaver console.
Instructions for connecting the Foot Control Interface cable to the pump and shaver console.
Describes the disconnection of the Patient Tube Set and Inflow Tube Set after surgery.
Details the disconnection of the Outflow Tube Set after the surgical procedure.
Provides steps for connecting a new Patient Tube Set for subsequent operations.
Guides on removing tubing, accessories, and performing initial cleaning.
Instructions on powering on the DOUBLEFLO pump and preparing it for use.
Details how to adjust pump pressure and recommended levels for various joints.
Explains the use of LAVAGE mode to improve visualization during surgery.
Describes how to use the RINSE mode for cannula suction.
Explains the function of the equipotential terminal for electrical safety connections.
Step-by-step guide for cleaning the pump, interfaces, and accessories safely.
Displays the name and address of the official manufacturer of the device.
Outlines the warranty period, terms, and conditions for the pump and accessories.
Specifies the recommended temperature and humidity ranges for storing the pump.
Defines the ambient temperature, humidity, and pressure for operating the pump.
Details pressure settings, inflow, cannula, and shaver flow rates.
Presents the electromagnetic compatibility test levels and compliance for the pump.
General| Manufacturer | Smith & Nephew |
|---|---|
| Model | DOUBLEFLO |
| Type | Water Pump |
| Flow Rate | Adjustable, typically up to 2 liters per minute |
| Power Source | Electrical, AC power |
