9
1. Always remove the plug from the power outlet before cleaning.
! CAUTION: The mixer must not be immersed in water or other liquids. Electric shock
hazard! Remove the plug from the socket before you clean the appliance.
2. Remove the beater, dough hook and stainless steel whisk from the mixer.
3. Wash the beater, dough hook and stainless steel whisk and the mixer bowl in hot dish
washing detergent. The beater and dough hook must not be cleaned in a dishwasher. The
stainless steel whisk and bowl are dishwasher safe.
4. Rinse and dry all parts thoroughly after cleaning.
5. Wipe the mixer and base clean with a slightly damp cloth. The mixer and base
must not be cleaned in the dishwasher or immersed in water or any other liquid.
Troubleshooting Guide
Cleaning and Maintenance
Problem Solution
No power. Connect the appliance to the power
socket.
Spraying is occurring. Ensure the pouring shield is placed on the mixing bowl and
start with a lower speed.
The mixing attachment is
loose.
Insert the mixing tool into the socket and rotate so its
securely locked in place.
The machine stops during
operation.
Unplug and check for obstruction or overloading.
Turn the speed control to 0 and then restart. If the
machine will not operate,remove some of the ingredients
to reduce the load and restart.
If the problem does not resolve, unplug and allow to stand
for 10 minutes. Plug in and reselect the speed.
If the machine does not restart following the above
procedure, then contact customer support for further
advice.
Machine is labouring Switch off and remove some of the ingredients.
To Next Page
