To Next PageTo Next PageWhat to do if the Smiths Medical L1-CW-120V does not start?
If the convective warmer doesn't start, check if the power cord is correctly plugged into both the rear of the warmer and a working electrical outlet. Inspect the power cord for any damage and replace it if needed. If the issue persists, try removing the power plug from the mains and then re-inserting it to resolve a potential software fault.
What to do if my Smiths Medical L1-CW-120V Food Warmer has weak airflow?
If the Smiths Medical Food Warmer has weak airflow, check the air filter intake for any obstructions and remove them. Also, inspect the air filter itself for clogging or obstructions and replace it if necessary.
Why is my Smiths Medical Food Warmer making so much noise and the airflow is too strong?
If the airflow from the convective warmer is too strong and noisy, check the air filter to ensure it is properly installed. Replace the air filter if it's defective. If the issue continues, remove the power plug from the mains and then re-insert it.
What does it mean if all amber indicators are flashing on my Smiths Medical L1-CW-120V Food Warmer and it won't run?
If all the amber indicators on the bottom row are flashing and the warmer won't run, remove the power plug from the mains, make sure that the filter is installed correctly, and then re-insert the power plug.
What to do if my Smiths Medical L1-CW-120V is running, but there's no heat?
If the motor is on and air is flowing, but there is no heat, make sure that the ambient air button is not selected. Select the desired temperature setting.
What to do if all indicators are flashing and the Smiths Medical L1-CW-120V Food Warmer will not run?
If all indicators are flashing and the warmer doesn't run, remove the power plug from the mains. Check that no buttons are stuck or pressed. Re-insert the power plug and watch for the system to start normally. If this doesn't work, remove and re-insert the power plug again to resolve a potential system fault.
What does it mean when the Occlusion indicator is illuminated on my Smiths Medical Food Warmer?
If the Occlusion (pinched hose) detector illuminates solid or is flashing, but the motor is operating and air is flowing, check the hose and blanket for anything blocking airflow, such as a pinch or kink.
What should I do if my Smiths Medical Food Warmer is running, but the Temperature Setting Indicator is flashing slowly?
If the warmer is running, but the selected Temperature Setting Indicator is flashing slowly, allow the warmer time to reach the set temperature.
Why is the Temperature Setting Indicator flashing and an alarm sounding on my Smiths Medical Food Warmer?
If the warmer is running, the selected Temperature Setting Indicator is flashing slowly, and an alarm is sounding, the warmer has not reached the set temperature within the expected time. Continue to wait for the temperature to be reached.
What should I do if the Smiths Medical Food Warmer has no air flow?
If there is no air flow, check the hose and thermistor cable connections to ensure they are properly connected.
General| Brand | Smiths Medical |
|---|---|
| Model | L1-CW-120V |
| Category | Food Warmer |
| Language | English |
Lists critical warnings about potential death or serious injury.
Lists precautions to prevent device malfunction, failure, or damage.
Details the function of each control, indicator, and display.
Provides step-by-step instructions for operating the convective warmer daily.
