Display Interface and Instructions
Note: Knob*
Konb: Volume/Menu up or down
Button: Press to Menu/Enter
Hold to Return or Power ON/OFF
Bluetooth operating instructions**
Connection:
Step 1: Switch the input source in the SETTING MENU or press the Bluetooth
button of the remote;
Step 2: Turn on the Bluetooth function of the mobile phone, search for
"SMSL SU-9", and tap to pairing. When the mobile phone displays
"connected", it has been successfully connected.
Re-connection:
When you had lost the connection with the SU-9, for example,going out, and
back home, some phones will not re-connect the SU-9 if the SU-9 has not
been re-boot, so you can press the Bluetooth button on the remote to Re-connect.
Clear pairing: Long press the "Bluetooth" button on the remote control. After clearing
the pairing, some phones may no longer be able to search for "SMSL SU-9". In
this case, you need to delete the Bluetooth device "SMSL SU-9" which saved in
the phone, and then search and pairing again.
Optical input RCA output
5 6
Coaxial input
9
7
Balanced output
8
Knob* Remote windowDisplay
Bluetooth antenna**
1 2 3
4
USB input
AC IN
10
4 5 6
9
7
810
23
1
To Next Page
Loading...
