EasyManua.ls Logo

SMSL SU-9 - Advanced Function Settings; Configuration of DSD Filters, Sound Color, and System Options

SMSL SU-9
22 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BRIGHTNESS
LEVEL 1 ~ LEVEL 6
SYSTEM
This page shows the system infomations, model name, version...
DPLL
MIN ~ MAX
(A total of 15 kinds, the default is 7 kinds. The larger the number is, the stronger the range
to adapt to jitter, and the smaller the number, the better the performance against clock jitter.)
Instructions
There are 4 kinds of digital filtering in total.It's the way that the digital operation means
the clutter outside the audioFilter out,respectively
47kHz Cutoff
50kHz Cutoff
60kHz Cutoff
70kHz Cutoff
DSD FILTER
There are 9 sound color settings in SU-9.
Rich1 Rich2 Rich3
Tube1 Tube2 Tube3
Crystal1 Crystal2 Crystal3
This setting is usingthe DSP of ES9038PRO,to make some different sound color, all of
these settings will not change the frequency res ponse curve.When set to "Standard",
this setting will be bypassed.
SOUND COLOR
Volume control enable or disable.
Vol Fixed : In this mode, volume is fixed on max output level, and the SU-9 will
ignore the volume operations.
Vol Variable: In this mode, volume can be adjust by remote controller, and make
SU-9 a pre-amplifier.
PRE MODE
RESET
In this interface, press and hold the button of the knob, the system will reset all
settings, including Bluetooth pairing status.

Related product manuals