To Next PageTo Next Page
Need help?Do you have a question about the SMTAV BA30S and is the answer not in the manual?
Details about the camera's image sensor, including resolution, zoom, and low-light capabilities.
Information on simultaneous IP, 3G-SDI, and HDMI video output options.
Covers VISCA, IR control, web interface, and mounting details.
Instructions for setting IR address and image freeze via remote functions.
Details on accessing OSD menu, backlight compensation, and PTZ recalibration.
List of shortcut commands for various 'Set' functions via the IR remote.
Instructions for controlling camera pan and tilt using the remote's directional buttons.
How to use the zoom buttons for slow or fast zoom in/out.
Guide to using Auto, Manual, Far, and Near focus functions.
Control functions for backlight compensation, pan direction reversal, and pan/tilt recalibration.
How to put the camera into and out of standby mode using the remote.
Instructions for storing and erasing preset camera positions using the IR remote.
How to recall stored preset positions and settings using numeric buttons.
How to select different cameras for control using the IR remote.
Procedure for setting the camera's IR address to control up to four cameras.
Using the remote to freeze or unfreeze the video image.
Parameters for RS232C communication, including baud rate, data bits, stop bit, and parity.
Parameters for RS485 communication, supporting VISCA, Pelco-D, and Pelco-P protocols.
Details on ACK/Completion messages and various error messages issued by the camera.
How to navigate the On Screen Display (OSD) menu using the remote control buttons.
Adjusts camera settings like Mode, ExpCompMode, Backlight, Gain Limit, Anti-Flicker, Meter, and DRC.
Configuration for 2D (NR2D) and 3D (NR3D) noise reduction levels.
Settings for Language, DVIMode, Lens, Auto Scan Shoot, Auto Focus L, and MotionSync.
Specifies OS, network protocol, and client PC requirements for network connection.
Steps for connecting the camera to the network and powering it on.
Guide to configuring camera IP address, subnet mask, gateway, and DNS.
Overview of controls for Live view, Pan/Tilt/Zoom, Focus, and saving/recalling presets.
Settings for the primary video stream, including protocol, resolution, bit rate, and frame rate.
Settings for the secondary video stream, including protocol, resolution, bit rate, and frame rate.
Configuration for LAN parameters, network ports, and Pelco-D/P addresses.
Settings for Secure Reliable Transport protocol: enable, port, encryption, and password.
Configuration for RTMP(S) streams and RTSP authorization.
Enabling ONVIF protocol and adjusting Multicast settings.
Settings for Software Development Kit and Network Time Protocol.
Details on TCP/UDP server ports and command formats for PTZ control.
Commands for Pan, Tilt, and Zoom control via HTTP-CGI interface.
HTTP-CGI commands for focus, focus lock, presets, and home position recall.
HTTP-CGI commands for direct recall of pan, tilt, and zoom positions.
HTTP-CGI commands for OSD menu navigation and selection.
HTTP-CGI commands for image settings and orientation (flip/mirror).
Instructions for capturing a series of four still images using HTTP strings or IR remote.
Instructions for capturing a series of four videos using HTTP strings or IR remote.
Guidelines for cleaning the camera body and lens, and storage.
Usage conditions to avoid for optimal performance and to prevent damage.
Solutions for 'No image', 'Abnormal display', and 'Shaky/vibrating image'.
Steps to diagnose and resolve problems with the IR remote controller not working.
Steps to diagnose and resolve issues with serial communication not functioning.
General