Snailax SL-166 - How to Charge the Battery; Battery Charging

BATTERY CHARGING:
1. Posion the massager on the chair or other support.
2. Connect the adapter cable to the corresponding cable on the cushion.

How to charge the Baery
3. Plug the charging adapter into an outlet.
4. Normally it takes 2.5 hours to fully charge the baery.
5. Indicator light :
While charging, the indicator light will turn ‘RED’ and blink
When fully charged, the indicator light will keep ‘RED’ and not blink
( If the baery is full, the massager can work connously for around 80 minutes. )
When the baery is under 20%, the indicator light will turn ‘Green’ and blink.
When the baery is over 20%, the indicator light will keep ‘Green’ and not blink.
6. It is safe to use the massager whilce charging.
NOTE:
Aenon ! Please only use provided charging adapter.
HEAT
SPOT
DEMO
CHARGE INDICATOR
Indicator light