What to do if my Snailax SL-256 doesn't start?
If your Snailax Massager doesn't start, consider the following: * If the device has been in use for more than 15 minutes, allow it to rest for 15 minutes before resuming. * Ensure the adapter is securely plugged into the socket. * Verify that the adapter output is correctly connected to the device's power inlet wire.
Why does my Snailax SL-256 Massager switch off suddenly?
Your Snailax Massager might switch off suddenly due to these reasons: 1. It may have been in use for 15 minutes. To continue, press the power button after resting the unit for 15 minutes. 2. The overheat protection function may have been activated. If so, please allow the device to rest for 15-30 minutes before restarting.
How to fix Snailax SL-256 Massager when massage heads only rotate in the upper or lower region?
If the massage heads on your Snailax Massager only rotate in the upper or lower region, it means the massage has been activated for only the upper or lower back region. Press the 'Full Back' button to allow the massage to cover both regions.
What to do if infra-red lights are on but there is no motion from massage heads in my Snailax SL-256 Massager?
If the infra-red lights are on but the massage heads aren't moving on your Snailax Massager, the device may be jammed. Remove any pressure or load from the device and press the 'Full Back' button to try again.
Why is there jerky motion of massage heads or vibrations from my Snailax SL-256 Massager?
The jerky motion or vibrations in your Snailax Massager could be due to excessive pressure applied to the device. Reduce the load and try again.
Why are the massage heads rotating at reduced speed in my Snailax SL-256?
The massage heads on your Snailax Massager may be rotating at a reduced speed because the load on the massage heads is excessive. Reduce the load and try again.
How to make Snailax Massager massage heads rotate in full region?
If the massage heads on your Snailax Massager only rotate in the upper or lower region, it's likely because the massage has been activated for only the upper or lower back region. Press the 'Full Back' button for the massage to cover both regions.
Why does my Snailax Massager keep turning off?
If your Snailax Massager switches off suddenly, it might have been in use for 15 minutes. To continue, let the unit rest for 15 minutes, then press the power button again. Alternatively, the over-heat protection function may have been activated. In this case, please rest the device for 15-30 minutes before restarting.
What to do if infra-red lights are on but massage heads aren't moving on my Snailax Massager?
If the infra-red lights are on but there is no motion from the massage heads on your Snailax Massager, the device may be jammed. Remove any pressure or load from the device, and then press the 'Full Back' button to try again.
Why are the massage heads on my Snailax SL-256 Massager rotating slowly?
If the massage heads on your Snailax Massager are rotating at a reduced speed, it could be due to excessive load on the massage heads. Reduce the load and try again.
Lists key features including full back Shiatsu massage, heat therapy, vibration, and material composition.
Provides product specifications such as measurements, weight, voltage, nominal power, and automatic runtime.
Instructions for attaching the massager to a chair and connecting the adapter to power.
Guidance on using the detachable flap and blankets to modify the massage pressure.
Advice on adjusting sitting height with cushions to better reach the lower back area.
Covers essential safety rules like avoiding water, damage, unattended use, and using correct power sources.
Details who should refrain from using the device, including pregnant women and those with specific health concerns.
Explains selecting massage areas (upper, lower, full back) and using spot function with arrow keys.
Details how to activate seat vibration, heat therapy, and set the massage timer (5, 10, 15 minutes).
Describes the power button for turning the device on/off and the demo button for function previews.
Provides instructions for cleaning the massager with a moist cloth and proper storage away from hazards.
Offers solutions for common problems like slow massage heads, sudden shut-offs, and device failure to start.
Outlines the 30-day money back, 90-day replacement, and 24-month warranty, plus contact details.
Explains how to activate the 2-year free warranty by sending a message or email with 'WARRANTY'.
General| Model Number | SL-256 |
|---|---|
| Heat Function | Yes |
| Massage Nodes | 4 |
| Intensity Levels | 3 |
| Weight | 3.5 lbs |
| Timer | 15 minutes |
| Auto Shut-off | Yes |
| Massage Areas | Back, Neck, Shoulders |
| Car Adapter | Included |
| Functions | Kneading, Heat, Vibration |
| Power Source | AC Adapter |
| Material | PU Leather |
| Type | Shiatsu Massage |
To Next Page
