EasyManua.ls Logo

Snailax SL-482 - Battery Charging; Charging Procedure; Charging Indicator Lights; Safety Instructions

Snailax SL-482
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Baery Charging
3. Plug the charging adapter into an outlet.
4. Normally it takes 2.5-3 hours to fully charge the baery.
5. Indicator light on POWER Buon :
- When POWER buon indicator turns green and blink, that
means the baery is low, please charge in me.
- While charging, the POWER buon indicator light will turn
‘RED’ and blink.
- When fully charged, the POWER buon indicator will keep
‘RED’ and not blink
- If the baery is full, the massager can work connously for
around 80 minutes.
6. It is safe to use the massager whilce charging.
NOTE:
Aenon ! Please only use provided charging adapter.
Safety Instrucons
READ ALL INSTRUCTIONS BEFORE USE. SAVE THESE
INSTRUCTIONS FOR FUTURE REFERENCE.
IMPORTANT SAFEGUARDS:
WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN
CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
1. Connect the charging adapter cable to the corresponding port
on the massager

Related product manuals