INTRODUCTION
Page ii
Effective
09/2005
GENERAL SPECIFICATIONS AND MACHINE FEATURES
MAJOR FEATURES
Auto Brake After Measuring Cycle
Two Window Display
Easy Electronic Access
SAPE (1d) Auto Distance Parameter Entry
Membrane Panel Data Entry
Four (4) Mounting Cones
ALU-S Function
Quick Nut With Speed Knobs
Match Balance
Total Spin Counter
Calibration Counter
Resettable Counter
Operator Productivity Counter
2 Operator Mode
SPECIFICATIONS
Shaft size: 28.5mm (1 1/16”)
Balance (shaft) speed: 90RPM
Cycle time: 15 seconds with an 'average' 14" tire & wheel combination
Balance Types: Five 2-plane alloy modes, plus static, dynamic and Match Balance modes.
Accuracy: 0.1 oz. (2.8g)
Weight Positioning resolution: 0.7 degrees
Rim Width capacity: 3"-20" (406mm)
Rim Diameter capacity: 6"-30" (152mm-660mm)
Maximum Tire Diameter: 44" (1118 mm)
Maximum Tire Width: 20" (483 mm)
Tire Weight: 120 lbs. (54.5kg)
Shipping Weight: 170 lbs. (77kg)
Power requirements: 115 / 230 VAC; 60 hz; 2 amp
STANDARD EQUIPMENT
EAA0247G21A- Rim Width Caliper
EAM0005D40A- Calibration Weight
EAA0260D63A- Standard Adapter Kit (4 cone system - 1.66" - 5.25", clamping hood, quick nut) See Part
Reference for individual part listings.
To Next Page
Loading...