Snap-On ACT760B User Manual

RETURN FOR REPAIR POLICY
Every effort has been made to provide reliable, superior quality
products. However, in the event your instrument requires repair,
forward unit to Service Center freight prepaid to the address below
with return address, phone number and/or email address.
SNAP-ON TOOLS
SERVICE CENTER
2651 W 81st Street
Hialeah, FL 33016
WARRANTY POLICY
The ACT760B Refrigerant Gas Leak Detector is warranted to be
free of defects in materials and workmanship for a period of three
years from the date of purchase including an industry first two year
warranty on the sensor. This warranty applies to all repairable
instruments that have not been tampered with or damaged through
improper use including unauthorized opening of the unit. Please
ship warranty units that require repair freight prepaid to Service
Center along with proof of purchase, return address, phone number
and/or email address.
Snap
-
on Wrench “S” and There is a
Difference are trademarks of Snap-on
Incorporated.
©2012 Snap-on Incorporated.
All Rights Reserved. Printed in U.S.A.
Snap-on, 2801 80
th
St. Kenosha WI 53143
Model ACT760B
Refrigerant Gas Leak Detector
User Manual
Detects all CFC, HFC, HCFC, HFO
Refrigerants including blends
Design certified by ASCI
and Intertek to meet SAE
J2791, J2913 and EN14624

Snap-On ACT760B Specifications

General

Brand	Snap-On
Model	ACT760B
Category	Security Sensors
Language	English

Summary

Return for Repair Policy

Warranty Policy

Introduction and Features

Product Specifications

Details on model, sensitivity, sensor life, response time, power, battery, warm-up, probe length, weight, and warranty.

Cross Sensitivity to Automotive Chemicals

Lists automotive chemicals and their response to the leak detector, indicating potential false positives.

Maintenance and Operation

Control Panel Overview

Identifies key indicators and controls like low battery, sensitivity level, audio mute, and power.

Operating Instructions

Guides on turning on, warm-up, and readiness indicators for leak detection.

Sensitivity Level Adjustment

Explains how to change sensitivity levels for different refrigerants like R-134a and R-1234yf.

Calibration, Testing, and Indicators

Calibration Modes

Details automatic and manual calibration modes for accurate leak detection in various environments.

Sensitivity Level Adjustment

Instructions on how to adjust sensitivity levels (NORM, HI, LO) using the SENS button.

Leak Test Vial Procedure

Steps to test the detector's performance using the included leak test vial.

Low Battery and Audio Mute

Information on low battery indicator and how to silence or restore the audio beep and alarm.