Why won't my Snap-On BK6500 Analytical Instruments unit switch on?
If your Snap-On Analytical Instruments unit won't switch on, it's likely because the battery is very low. To resolve this, charge the unit until the green charge LED illuminates.
What to do if Snap-On Analytical Instruments unit will not charge?
If the Snap-On Analytical Instruments unit is not charging, ensure the power supply is correctly plugged into both the AC supply and the BK6500. Also, if the battery is too hot, allow the unit to cool down before attempting to charge it again.
What to do if the image on Snap-On BK6500 Analytical Instruments display is frozen?
If the image on the display of your Snap-On Analytical Instruments is frozen, it indicates that the processor might be locked up. To resolve this, cycle the power to restart the unit.
What to do if LCD screen is black, but Snap-On Analytical Instruments Display Unit is ON?
If the LCD screen on your Snap-On Analytical Instruments Display Unit is black but the unit is ON, check if a video out cable is inserted. If it is, remove the cable.
What does it mean if Charging LED glows amber on Snap-On BK6500 Analytical Instruments?
If the charging LED on your Snap-On Analytical Instruments glows amber, it means the battery is low. Charge the unit until the green LED illuminates.
What does it mean if Charging LEDs flash red/green on Snap-On BK6500 Analytical Instruments?
If the charging LEDs on your Snap-On Analytical Instruments are flashing red/green, it indicates a faulty battery. Return the unit to the appropriate service center location.
What to do if LED on Snap-On BK6500 Analytical Instruments imager is ON but no image?
If the LED on the imager of your Snap-On Analytical Instruments is ON but there is no image, it could be due to a broken video signal wire. Test with a second imager if available. If the issue persists, return the unit to the appropriate service center location.
How to fix Snap-On BK6500 Display Unit when it does not display image from imager handle?
If the Display Unit of your Snap-On Analytical Instruments does not display an image from the imager handle, the imager might not be properly inserted. Ensure the imager is securely connected to the imager handle.
What to do if Snap-On BK6500 Analytical Instruments battery does not hold a charge?
If the battery of your Snap-On Analytical Instruments does not hold a charge, it suggests a faulty battery. Return the unit to the appropriate service center location for assistance.
General| Brand | Snap-On |
|---|---|
| Model | BK6500 |
| Category | Analytical Instruments |
| Language | English |
Guidelines for maintaining a safe and hazard-free work environment during operation.
Precautions for user alertness, physical well-being, and use of personal protective equipment.
Safety measures related to the BK6500's battery and A/C power supply.
Instructions for proper handling and use of the video scope to prevent damage and ensure safety.
Procedures for cleaning, maintenance, and when to seek professional service.
Information regarding compliance with FCC rules for digital devices.
Safety warnings and precautions specific to the operation of the video scope.
Overview of the BK6500 digital video scope and its capabilities.
Detailed specifications for the viewer unit, imager, and power supply.
Instructions for attaching the correct power adapter to the charger unit.
Procedure for connecting the BK6500 to the charger and initiating the charging process.
Steps to connect a new imager to the imager handle securely.
Covers displaying images, adjusting LED light, and understanding the viewer unit functions.
Guides on taking photos, recording videos, and using kickstand/magnets.
Explains the touchscreen interface, button functions, and battery status indicators.
How to navigate menus, use the on-screen keyboard, and switch between Live/Playback modes.
Details on editing, playing files, adjusting volume, and live mode camera selection.
To Next Page