Digital Video Scope
7
Snap-on
Getting Started
Description
The BK6500 video scope displays live color video from an imaging sensor and lighting source connected
to a flexible dual view imager cable. The unit is capable of capturing still images and full-motion video,
along with audio. It can be used to look into tight spots and display real-time video to a color LCD. The
magnet accessory is included to attach to the imager head to provide application flexibility.
Specifications
Total Weight . . . . . . . . . . . . . . . . . 1lb 10oz (800g)
VIEWER UNIT:
Power Supply ................................ Internal Li-Ion Battery, 3.7V, 2600 mAh, 9.6 watt-hours
Charge time ..................................5 hours
Charger Input ................................ 5V DC, 1. Amp
Width .............................................1.77" (45mm)
Length ...........................................7.2" (180mm)
Height ............................................3.94" (100mm)
Screen Resolution ........................480 x 272 RGB with LED backlight
4.3" (10.92 cm) Color Touchscreen LCD
Audio Input .................................... Built-in Microphone
Audio Output ................................. Built-in Speaker
Video Out ......................................NTSC/PAL
Run-time on battery ...................... 3.25 hours (approximately)
Operating Temperature ................32°F to 140°F (0°C to 60°C)
(Batteries will not charge above 113°F (45°C))
Storage Temperature .................... -4°F to 140°F (-20°C to 60°C )
77°F (25°C) is ideal for maximum battery life.
Relative Humidity ..........................5% to 90% non-condensing
To Next Page
Loading...