To Next PageTo Next Page
Need help?Do you have a question about the Snap-On CTG861 and is the answer not in the manual?
General| Type | Infrared Thermometer |
|---|---|
| Temperature Range | -76° to 1400°F (-60° to 760°C) |
| Accuracy | ±2°F (±1°C) @ 32° to 150°F (0° to 65°C), ±2% of reading @ >150°F (>65°C) |
| Response Time | <500 ms |
| Battery | 9V |
| Battery Type | 9V Alkaline |
| Display | LCD |
| Resolution | 0.1°F or 0.1°C |
| Emissivity | Adjustable, 0.10 to 1.00 |
| Battery Life | Approximately 12 hours of continuous use |
General safety warnings applicable to all power tools.
Guidelines for the proper use and maintenance of battery-powered tools.
Information regarding qualified servicing of the power tool.
Critical safety instructions for operating the laser sight.
Warnings concerning potential battery explosion or fire hazards.
Precautions to prevent short circuits that can cause fires.
Safety advice to avoid electric shock hazards.
Information on preventing burns from battery leakage or contact.
Guidelines for the safe and responsible disposal of batteries.
Core safety directives for operating the equipment.
Specific safety warnings related to the battery charger.
Warnings regarding potential battery explosion.
How to use the trigger for instrument activation and reading hold.
Function to toggle between Celsius and Fahrenheit units.
How to activate and use the Min/Max recording feature.
Using the 'E' button for emissivity adjustment and alarm control.
Identification of the laser port on the instrument.
Detailed specifications for Infrared temperature measurement.
Specifications for K-type thermocouple measurements.
Specifications related to emissivity adjustment and laser sight.
Specifications for units, distance ratio, hold, and response time.
Operating/storage conditions and battery type specifications.
Explanation of safety symbols and their meaning.
Symbol indicating reference to the instruction manual.
Specifications for battery type, voltage, and charging time.
Information on battery lifespan and capacity.
Recommended temperature range for battery discharge.
Specifications for charger electrical input, output, and weight.
Recommended temperature range for battery charging.
Step-by-step guide on how to measure temperature with the device.
How to record and recall minimum and maximum temperature readings.
Procedure for measuring temperature using a K-type thermocouple.
How to activate and deactivate the temperature alarm function.
Instructions for setting high and low temperature alarm thresholds.
Explanation of the device's distance to target measurement ratio.
Understanding emissivity and its importance for accurate readings.
Step-by-step guide to adjust the emissivity setting.
Method to set emissivity using a K-type contact probe.
A table listing emissivity values for various common materials.
Information on tool overload protection and temporary shutdowns.
Indication of low battery voltage requiring charging.
Detailed instructions for charging the battery pack.
Recommendations for servicing the tool by qualified professionals.
Explanation of safety circuits within the battery pack.
Guidance for operating the battery in cold and hot weather.
Recommendations for proper storage of battery packs.
Contact details for warranty service and calibration requests.
List of available parts for the battery charger.
List of available battery part numbers and descriptions.
Details on limited warranties for tools and batteries.
Information on warranty exclusions and liability limitations.
Acknowledgement of Snap-on trademarks and RBRC.
