Snap-On POLARTEK PLUS EEAC331 Service Manual

• 28 •
Replace drain cap, refill vacuum
pump with new oil to the center of
control glass then replace filling cap.
When done press ENTER to exit
R134a MAINTENANCE
VACUUM PUMP OIL CHANGE
Unscrew the fitting cap and
the drain cap then remove used oil
from vacuum pump
then press ENTER
R134a MAINTENANCE
VACUUM PUMP OIL CHANGE
R134a MAINTENANCE
Hours remaining (hh:mm)
XX:XX
Do you want to change the oil?
YES
NO
VACUUM PUMP OIL CHANGE
2
FIG. 23
TOOLS:
 Funn
el
 Disp
osal
conta
iner
 Allen
wren
ch n°
5; 8.
4

Snap-On POLARTEK PLUS EEAC331 Specifications

General

Brand	Snap-On
Model	POLARTEK PLUS EEAC331
Category	Test Equipment
Language	English