Snap-On PRO CHARGER 250 EEBC302A User Manual

1
EEBC302A
PRO CHARGER 250
Battery Charger User Manual
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety and operating
instructions for Snap-on PRO CHARGER 250 Battery Charger
model EEBC302A. Refer to the information in this manual often
for safe operation.
Read All Instructions
Read, understand and follow all safety messages and
instructions in this manual and on the test equipment. Safety
messages in this section of the manual contain a signal word, a
three-part message, and, in some instances, an icon.
The signal word indicates the level of hazard in a situation:
• Danger indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury to the
operator or bystanders.
• Warning indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury to the
operator or bystanders.
• Caution indicates a potentially hazardous situation which, if
not avoided, may result in moderate or minor injury to the
operator or bystanders.
The three-part message uses three different type styles to
further define the potential hazard.
• Normal type states the hazard.
• Bold type states how to avoid the hazard.
• Italic type states the possible consequences of not avoiding
the hazard.
An icon, when present, gives a graphical description of the
potential hazard.
SAVE THESE INSTRUCTIONS

Snap-On PRO CHARGER 250 EEBC302A Specifications

General

Brand	Snap-On
Model	PRO CHARGER 250 EEBC302A
Category	Battery Charger
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

Battery Gases, Charging Preparation and Charger Location

Safety precautions regarding battery gases, charging preparation, and charger placement.

Acid Burns

Safety warnings and procedures related to handling battery acid and preventing burns.

Grounding, AC Power Cord Connections and General Charger Use

Electrical safety, proper grounding, and general usage guidelines for the charger.

Thermal Burns

Warnings and precautions against thermal burns from batteries and charger components.

Battery in Vehicle

Instructions for charging a battery while it is installed in a vehicle.

Disconnecting Charger

Procedures for safely disconnecting the charger from the battery and power source.

Battery Not in Vehicle

Step-by-step guide for charging a battery removed from a vehicle.

Functional Description

Control Panel Overview

Description of the charger's control panel features and their functions.

Battery Charging Procedure

State of Charge and Capacity Chart

Table for determining battery charge time based on state of charge and capacity.

Charging More than One Battery

Guidelines for charging multiple batteries, either in parallel or series.

Cranking Assist

Assembly Instructions

Maintenance

Parts List

List of available parts and their corresponding part numbers for the charger.

Wiring Diagram

Limited Warranty