Snapper 1855 Series User Manual

Essential safety guidelines for operating the tractor and mower.

Recommendations for safe use, including handling fuel and avoiding hazards.

Warnings about rotating blades, refueling, and general caution.

Introduction to the Snapper Model 1855A Garden Tractor and its features.

Explanation of the manual's sections for maintenance and servicing.

Location and recording of the engine serial number.

Location and recording of the chassis serial number.

Location and recording of the mower serial number.

Instructions and warnings for safely filling the fuel tank.

Checks for engine oil, drain plugs, fuel, air filter, electrical, choke, throttle, battery, alternator, RPM, carb, governor.

Checks for transmission oil, fittings, controls, bolts, wheels, tires, and drive test.

Ammeter, PTO Switch, Choke, Ignition Switch, Throttle, Hourmeter.

Speed Control/Parking Brake Lever, Hydraulic Control Levers.

Rear Axle Shift Lever, Rear PTO Control Lever, Forward/Reverse Pedal, Neutral Return Brake Pedal.

Seat Control for operator comfort.

Crucial checks before starting the engine.

General advice for safe and efficient tractor operation.

Step-by-step guide to starting the tractor engine.

Procedures for operating and safely stopping the tractor.

Information on travel speeds and moving by hand.

Guidelines for attaching various implements to the tractor.

Importance of and schedule for lubrication.

Procedure for replacing the transmission filter.

Checking and changing engine oil and filter.

Checking and replacing transmission/rear axle oil.

Lubricating front axle fittings.

Checking electrolyte levels and cleaning terminals.

Cleaning and replacing the air cleaner element.

Maintaining tire pressure and checking wheel bolts.

Inspecting fuel filter and cooling system.

Spark plug, breaker points, cylinder head bolts, carburetor adjustment.

Adjusting and replacing traction drive and PTO belts.

Adjusting pedals, transmission, and brakes.

Adjusting toe-in and referencing wiring diagrams.

Tractor storage, ignition switch, and safety switches.

Troubleshooting hard starting, loss of power, and erratic operation.

Diagnosing knocking, skipping, and overheating problems.

Addressing issues with poor idling and backfiring.

Details on engine model, horsepower, bore, and displacement.

Information on transmission model and capacity.

Capacity and voltage details for fuel tank and battery.

Measurements for wheelbase, length, width, and ground clearance.

Details on front and rear tire sizes and types.

Specifications for PTO and hydraulic lift linkage.

The approximate weight of the tractor without the mower.

Preparing tractor and mower for attachment.

Procedures for attaching various mower types.

Safe operating practices and detachment procedures.

Instructions for attaching/detaching mowers using ramps.

Adjusting mower level and belt tension.

Replacing belts and servicing mower blades.

Guidelines for storing and removing the mower.

Specifications for the 48" mid-mount mower.

Specifications for the 54" mid and rear mount mower.

List of engine components to inspect before delivery.

List of chassis components to inspect before delivery.

Topics to explain to the owner upon delivery.

Details on warranty coverage, exclusions, and limitations.

Information on specific legal rights and state variations.

Snapper's policy on product improvements and changes.