Cutting Deck, Blade, Interlock
Footnotes:
TP 400-5143-3-WB-N
Manual No. 7006051A21" STEEL DECK WALK BEHIND MOWER
SERIES 7
9
Part No Descri
tionItem Qt
Note
1 7057663 1 DECK, Mower (Includes painted deck with
decals)
2 7091601 12 NUT, 5/16-18 Hex Flange Lock Was 90585
3 7090731 9 BOLT, 5/16-18 x 1/2" Short Neck Carriage (Gr.)
4 7091303 4 BOLT, 5/16-18 x 1" Short Neck Carriage Was 90383
5 7090324 2 SCREW, 3/8-16 x 1" Self-tapping (Engine Mounting)
6 7032417 1 SPRING, Wheel Bracket Type Interlock
7 7032416 1 BRACKET, Wheel Bracket Type Interlock
8 7012048 1 INSULATOR, Interlock
9 7091122 2 SCREW, 1/4-20 x 1/2" Self-tapping Was 90539
10 7090385 1 WASHER, #8 Tab Internal Tooth Lock
11 7090379 1 SCREW, #8-18 x 3/4" Hex Head Machine
12 7090167 1 SCREW, 3/8-24 x 2" Hex Head Cap (Gr. 5)
13 7012063 1 WASHER, Cone
14 7019795 1 BLADE, Cutter
14 7017168 1 BLADE, Cutter (For Recycling Models)
15 7012927 1 HUB, Blade Drive (7/8" Dia. I.D.) (For '90 Models &. Earlier)
15 7015626 1 HUB, Blade Drive (25mm Dia. I.D.) (For '91 Models & Later)
16 7010783 2 KEY, Hi-Pro (For '90 Models & Earlier)
16 7015894 2 KEY, Woodruff (Briggs)(Tecumseh 2 Cycle) (For '91 Models & Later)
16 7016755 1 KEY, Square (Robin & Tecumseh) (For '91 Models & Later)
17 7090201 1 SCREW, 5/16-18 x 5/16" Hex Socket Set
18 7021707 1 PULLEY, Engine (Briggs 3.5 H.P.) (7/8" I.D. x 1-7/8" O.D.) (For '90 Models & Earlier)
18 7015780 1 PULLEY, Engine (Briggs) (Tecumseh 2 Cycle) (25mm I.D. x 2-
1/8" O.D.)
(For '91 Models & Later)
18 7022106 1 PULLEY, Engine (Tec. & Robin) (25mm I.D.x 2-1/8" O.D.) (For '91 Models & Later)
19 7031968 1 SHIELD, Belt Opening Cover (For Push Models Only)
20 7012135 1 BUSHING, Interlock Wire
21 7060785 1 KIT, Air Lift (Includes items 22 thru 25); For
use with P/N 1-9795 Blade
22 7032558 2 LIFT, Air
23 7090391 4 WASHER, 5/16 Internal Tooth Lock
24 7091297 4 NUT, 5/16-24 Hex Was 90223
25 7090228 4 SCREW, 5/16-24 x 11/16" Machine
26 7011791 2 RETAINER, 5/16 Bolt
27 7090799 2 BOLT, 5/16-18 x 5/8" Carriage
To Next Page
Loading...
