Snapper 21401P

Safety Instruction & Operator's Manual
8NAPPER "HI.VAC
I
MODELS:
21351
21351D
_21351PD
21401
21401S
21401P
21401PS
21401PD
214X1
214XIR
214XIR--2
214XIP
214XIPS
214XIPR
214XIPR---2
WALK BEHIND
MOWERS
SNAPPER POWEREQUIPMENT[:_/-.-I..=;_. _:_:_i_i_i:i_____,""i:___"""ii::ii::iii!
McDonouqh GA 30253 / _oo-_J_o:o-,-::!::!::!::i::iiiREV_S_ON417/86)iiiiii!i:_
• ...:.:,:...:.:.,;:;:;:;:;.;t,;.;1.1...0.........,..-.-.-.-.-.........-.-
This manual covers all Snapper 21" design series I (last numeral in the five digit model designation)
walk behind mowers. Models without letter suffixes following the five digit designation are push
models equipped with Kwik-N-Ezy grass catcher. The letter suffix D indicates side discharge, P in-
dicates self-propelled, S indicates electric start, R indicates a premium engine and X in the fourth
digit indicates an extra tough version. The -2 suffix indicates the unit is powered by a 2-cycle engine.
Differences are pointed out wherever pertinent throughout the manual.
Thank you for buying a SNAPPER product! Before operating your mower, read this manual carefully
and pay particular attention to the Important Safety Instructions on page 2. Remember that mowers
and all power equipment can be dangerous if used improperly and keep in mind that safety requires
careful use in accordance with the instructions and .... common sense!

Snapper 21401P Specifications

General

Brand	Snapper
Model	21401P
Category	Lawn Mower
Language	English

Summary

Important Safety Instructions

Training Guidelines

Essential steps for operator training, familiarization with controls, and safe usage practices.

Preparation for Operation

Key checks and preparations before operating the mower to ensure safety.

Safe Operation Procedures

Critical procedures and precautions to follow during mower operation for user safety.

Operating the Mower

Pre-Start Checks

Mandatory checks to perform before starting the mower to ensure safe and correct operation.

Starting and Stopping the Engine

Detailed steps for starting and stopping the mower engine using rope or electric start methods.

Mowing and Adjustment Procedures

Mowing Procedure Guidance

Cutting Height Adjustment

Service and Blade Maintenance

General Service Procedures

Cutting Blade Service

Instructions for inspecting, sharpening, balancing, and replacing the mower blade.

Drive System and Belt Service

Clutch Linkage Adjustment