Snapper 21500 User Manual

Safety Instructions & Operator’s Manual
21" HI-VAC WALK MOWERS
STANDARD MODELS
SERIES 0
\ R21400, P21400, RP21400
\ 21500, R21500, P21500
RP21500, R21500T2
RP21500T2, RP21500KWV
P21550V, RP21550V
Thank you for buying a SNAPPER product! Before operating your mower, read this manual carefully
and pay particular attention to the important Safety instructions on page 2. Remember that mowers
and all power equipment can be dangerous if used improperly and keep in mind that safety requires
careful use In accordance with the instructions and ....common sense!
This manual covers SNAPPER 21" HI-VAC Series 0 (last numeral in the five digit model
designation) walk behind mowers. A letter "D" prefix designates side discharge models. Models
with an "M" prefix are recycling mowers. Those having a "P" prefix are self-propelled. Models
having a "T" suffix are Tecumseh powered; all others are Briggs & Stratton powered. A number 2
suffix denotes 2-cycle engines, and a "V" is used to distinguish engines equipped with overhead
valves. Differences are pointed out wherever pertinent, throughout the manual.
®McDonough, GA.,30253 U.S.A.
INSTRUCTION NO. 2-5080 (REV. 1, 7/93)

Snapper 21500 Specifications

General

Brand	Snapper
Model	21500
Speed Control	Variable Speed
Mulching Capability	Yes
Type	Walk-Behind Lawn Mower
Cutting Width	21 inches
Cutting Height	1.25 - 3.75 in

Summary

Important Safety Instructions

Pre-Operation Preparation

Safe Mower Operation

Key rules and precautions to follow while operating the mower.

Starting and Stopping Engine

Rope Start Procedure

Detailed instructions for starting the mower's engine using the rope pull.

Adjustments and Mowing Techniques

Cutting Height Adjustment

Procedures for adjusting the mower's cutting height for optimal grass cutting.

Recycling Operation Guide

Mowing Procedure

Guidance on effective mowing techniques, including speed and slope handling.

Lubrication and Blade Service

Lubrication Schedule

Cutting Blade Service

Instructions for inspecting, sharpening, and replacing the mower blade.

Clutch Linkage Adjustment

Clutch Linkage (Self-Propelled)

Procedure for adjusting the clutch linkage for self-propelled models.

Driven Disc Service and Adjustment

Driven Disc Service

Troubleshooting common issues with the driven disc and its components.

Driven Disc Adjustment