Snapper 355Z Series

44" & 50" Mower Deck - Belt & Idler Group
Footnotes:
TP 400-5275-C-HZ-N
Manual No. 510122524HP HYDRO DRIVE ZTR
355Z SERIES
39
Part No Descri
p
tionItem Qt
y
Note
1 5023256 1 BELT, #7-8060, 151" E.L. (FOR 44" DECK ONLY)
2 5044960 1 SPACER, .39 X 1.00 X .25
3 5044933 1 SPACER, .39 X .75 X .38
4 5023156 1 BOLT, 5/16-18 X 1 1/4 FLANGE
5 5025013X22 1 BOLT, 3/8-16 X 2-3/4" GD5 YZ
6 5025394 3 NUT, 3/8-16 HEX NYLOCK FLANGE
7 5025013X18 1 BOLT, 3/8-16 X 2-1/4 GD5 YZ
8 5025156 5 WASHER, 3/8 SAE
9 5025013X28 1 BOLT, 3/8-16 X 3-1/2 GD5 YZ
10 5020095 1 GREASE FITTING, 1/4-28 STRAIGHT
11 1676148 2 BUSHING, 0.628 ID X 0.751 OD X 0.400 LG PWDR MTL
12 5402228D 1 WELD, DECK IDLER ARM, CONSZ - RED
13 5047125 1 SPACER, .39 X 1.00 X .88
14 5403492D 1 WELD, MOUNT, IDLER, TENSION (FOR 44" DECK ONLY)
15 5021002 3 PULLEY, IDLER
16 1674669 1 SPACER, 0.39 ID X 0.625 OD X 1.15 LG CASE HARD
17 1715435 1 SPRING, EXTENSION, 1.00
18 5025392 1 NUT, 5/16-18 HEX NYLOCK FLANGE
19 5402172D 1 BRACKET, SPRING ANCHOR - RED
20 5025305 1 WASHER, .41 X 1.75 X .14
21 5023255 1 BELT, #7-8055, 155" E.L. (FOR 50" DECK ONLY)
22 5400412D 1 WELD, MT, IDLER, TENSION (FOR 50" DECK ONLY)
23 5049184 3 SPACER, HYDRO PULLEY