EasyManua.ls Logo

Snapper 355Z Series

Snapper 355Z Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ZERO-TURN MOWERS
355Z
5900748 355ZB2654, 26HP
5900755 355ZB2654FC, 26HP
5101461
Revision IR
Rev.Date 2/2008
TP100-7370-1R-HZ-N

Other manuals for Snapper 355Z Series

Question and Answer IconNeed help?

Do you have a question about the Snapper 355Z Series and is the answer not in the manual?

Snapper 355Z Series Specifications

General IconGeneral
EngineBriggs & Stratton
Engine Displacement190 cc
Cutting Width21 inches
Cutting Height1.25 - 3.75 inches
Cutting Height Positions7
Drive SystemRear-Wheel Drive
Deck MaterialSteel
Mulching CapabilityYes
Bagging CapabilityYes
Side Discharge CapabilityYes
Fuel Capacity0.5 gallons
Weight85 pounds
Warranty2 years limited

Summary

Safety Information

Operating Safety

Explains safe operation and operator responsibility.

Children Safety

Warns about hazards involving children.

Slope and Edge Hazards

Slope Operation Safety

Discusses dangers and precautions for operating on slopes.

Thrown Objects Hazards

Details hazards from spinning blades and debris.

Moving Parts Safety

Explains hazards from moving parts and safety systems.

Fuel, Enclosed Areas, and Service Safety

Edge and Water Hazards

Covers hazards related to retaining walls, drop-offs, and water.

Fuel and Enclosed Area Safety

Basic safety for fuel handling and operating in enclosed spaces.

General Operation, Transport, and Storage Safety

General Operation Safety Rules

Lists general safety rules for operating the unit.

Transporting and Storage Safety

Provides safety guidelines for transporting and storing the unit.

Noise Hazard Warning

Specific caution about noise levels and hearing protection.

Towed Equipment, Emissions, and Ignition System Safety

Slope Operation Details

More detailed safety instructions for operating on slopes.

Towed Equipment Safety

Safety for towing equipment.

Emissions and Ignition System

Information on emissions and ignition system compliance.

Service and Maintenance Safety

Service and Maintenance Safety

Focuses on safe handling of gasoline and general service procedures.

Safety Decals

Decals for Amputation, Pinch Point, and Thrown Objects Hazards

Describes hazards from rotating parts, pinch points, and thrown objects.

Decals for Fire and Carbon Monoxide Hazards

Covers warnings related to fire and carbon monoxide.

Decals for Slope and General Operation Hazards

Addresses hazards related to slopes and general operation rules.

Identification Tags and Safety Interlocks

Safety Interlock System Overview

Describes the safety interlock features and checks.

Operational Safety Checks Procedure

Details the specific safety checks for operation.

Safety Icons

Definitions of Hazard Alert Levels

Defines hazard alert levels (DANGER, WARNING, CAUTION).

Explanation of Hazard Icons

Explains various hazard icons used in the manual.

Assembly

Parts Bag Contents

Lists the components found in the parts bag.

Install Ground Speed Steering Control Levers

Positioning Control Levers

Describes how to position the levers.

Lever Alignment Adjustment

Explains how to align the control levers.

Seat & Safety Switch Assembly

Seat Adjustment Guide

Explains how to adjust the seat for operator comfort.

Seat Position Adjustment

Describes how to adjust the forward/backward position of the seat.

Charge The Battery

Battery Safety Rules

Lists safety precautions for handling batteries.

How to Prepare the Engine

Engine Preparation Safety Warning

Safety warning for fuel and oil handling during engine prep.

Check Tire Pressures

Features and Controls

Ground Speed Steering Control Levers

Description of the control levers.

Throttle Control Operation

Explanation of the throttle control.

Choke Control Usage

How to use the choke.

Ignition Switch Functions

Explanation of the ignition switch positions.

Secondary Controls and Adjustments

Hour Meter Function

Function of the hour meter.

PTO Switch Operation

How to engage/disengage the PTO.

Transmission Oil and Filter Info

Information on transmission oil and filter.

Seat Adjustment Lever

How to adjust the seat.

Fuel Tank and Gauge

Information about the fuel tank and gauge.

Mower Height of Cut Adjustment

How to adjust cutting height.

Parking Brake Operation

How to engage/disengage the parking brake.

Operation

General Operating Safety and Pre-Checks

Safety guidelines and checks before operating.

Slope and Trailer Loading Warnings

Warnings about slopes and trailer loading.

Starting the Engine

Stopping the Rider and Engine

Towing Warning

Warning against towing the rider.

Pushing the Rider by Hand

Zero-Turn Driving Practice

Smooth Control Lever Operation

Method for smooth operation of control levers.

Basic Driving Techniques

Forward Travel Practice

How to practice forward movement.

Reverse Travel Practice

How to practice reverse movement.

Practice Turning Techniques

Turning Around a Corner

How to practice turning.

Zero-Turn In-Place Maneuver

How to perform a zero-turn.

Advanced Driving Techniques

Executing End-Of-Row Zero Turns

Specific technique for end-of-row turns.

Mower Removal and Installation

Mower Deck Removal Procedure

Steps for removing the mower deck.

Idler Arm Rotation Warning

Warning about idler arm rotation during belt service.

Mower Deck Installation Procedure

Steps for installing the mower deck.

Mowing Procedures

Mowing Recommendations

Tips for effective mowing.

Grass Height Guidelines

Guidance on grass height for mowing.

Incremental Cutting for Tall Grass

Strategy for cutting tall grass.

Mowing Best Practices

Timing and Frequency of Mowing

Advice on timing and frequency of mowing.

Mowing Pattern Techniques

Techniques for efficient mowing patterns.

Broadcast Mowing Method

Explanation of broadcast mowing.

Speed Settings for Broadcasting

Recommended speed settings for broadcasting.

Cutting Height for Broadcasting

Guidelines for cutting height when broadcasting.

Mulching Mower Operation

Mulching Conditions and Requirements

Conditions needed for effective mulching.

Speed Settings for Mulching

Recommended speed settings for mulching.

Cutting Height for Mulching

Guidelines for cutting height when mulching.

Attaching a Trailer

Maintenance Schedule

Maintenance Schedule and Procedures

Provides a schedule for routine maintenance tasks.

Lubrication Guide

Lubrication Points Requiring Grease

Lists points for greasing.

Lubrication Points Requiring Oil

Lists points for oiling.

Servicing Mower Blades

Removing Mower Blades

Steps to remove mower blades.

Blade Sharpening Warning

Warning about sharp blades.

Inspecting Mower Blades

How to inspect mower blades for wear or damage.

Danger of Damaged Blades

Danger warning about blade damage.

Sharpening Mower Blades

Blade Sharpening Caution

Caution about sharpening.

Balancing Mower Blades

Blade Balancing Caution

Caution about blade balance.

Reinstalling Mower Blades

Blade Installation Torque Warning

Warning about blade bolt torque.

Engine Maintenance

Adding Fuel Safely

Steps for adding fuel safely.

Fuel Filter Replacement

Instructions for replacing the fuel filter.

Change Engine Oil & Filter

Transmission Oil and Filter

Checking and Filling Transmission Oil

Instructions for checking and filling transmission oil.

Transmission Oil Filter Change

Procedure for changing the transmission oil filter.

Battery Maintenance

Cleaning Battery and Cables

Steps for cleaning battery and cables.

Battery Handling Warning

Warning about battery handling.

Battery Charging

Battery Charging Warning

Warning about battery charging.

Storage Guidelines

Fuel Storage Warning

Warning about storing fueled units.

Speed Balancing Adjustment

Speed Adjustment Warning

Warning about speed adjustment.

Cutting Height Adjustment

Neutral Adjustment

Parking Brake Adjustment

PTO Clutch Adjustment

PTO Clutch Adjustment Warning

Warning about performing adjustments.

Blade Brake Check

Mower Deck Leveling

Side-to-Side Deck Leveling

Steps for side-to-side leveling.

Front-to-Back Deck Leveling

Steps for front-to-back leveling.

Mower Belt Replacement

Belt Replacement Warning

Warning about idler arm rotation during belt service.

Hydraulic Pump Drive Belt Replacement

Troubleshooting Guide

Rider Troubleshooting: Engine and Drive Issues

Problems and remedies for engine starting, running, and drive.

Maintenance Safety Warning

Safety warning for performing maintenance.

Mower Troubleshooting

Rider Troubleshooting: Drive and Steering

Problems and remedies for rider drive and steering.

Mower Troubleshooting: Engagement and Vibration

Problems related to mower engagement and vibration.

Mower Troubleshooting: Belt Issues

Problems related to mower drive belts.

Common Cutting Problems

Product Specifications

Detailed Product Specifications

Lists technical specifications for the mower.

Engine Power Rating Explanation

Explanation of engine power ratings.

Slope Identification Guide

Warranty Information

Snapper Limited Warranty Details

Explains the terms of the 2-year limited warranty.

Warranty Disclaimer and Exclusions

Legal disclaimers and limitations of the warranty.

Related product manuals