IdentificationTags
_\%_,dkee, WJ 53261 USA
,iMm,i . m,l,mm
SER,.L.o. xx×x_
NorthAmerican
Models
Whencontactingyourauthorizeddealer forreplacement
parts,service, or informationyouMUST havethese
numbers.
Recordyour model name/number, manufacturer's
identification numbers, and engineserial numbers in the
spaceprovided on the inside front cover for easyaccess.
Thesenumbers can befound in the locations shown.
NOTE."For location of engineidentification numbers, refer to
theengine owner's manual
UnitID Tag
SAFETYINTERLOCKSYSTEM
This unit is equippedwith safety interlock switches. These
safety systems are presentfor your safety, do not attempt
to bypasssafety switches, and nevertamper with safety
devices. Checktheir operation regularly.
Operational SAFETYChecks
Test1 -- EngineshouldNOTcrank if:
• PTOswitch is engaged,OR
• Parkingbrakeis not engaged, OR
• Ground Speed/ SteeringControl Leversare not in the
NEUTRALposition.
Test2 -- EngineSHOULDcrankandstartif:
• PTOswitch is NOTengaged,AND
• Parking brake is engaged,AND
• Ground Speed/ SteeringControl Leversare locked in
the NEUTRALposition.
Test3 -- EngineshouldSHUTOFFif:
• Operatorrises off seatwith PTOengaged,OR
• Operatorrises off seatwith parking brakedisengaged.
• Operatormoves ground speed/steering control levers
out of their neutral positions beforedisengaging parking
brake.
Test4 -- BladeBrakeCheck
Mower bladesand mower drivebelt should come to a
completestop within five (5) secondsafter electric PTO
switch is turned off (or operator rises off seat). If mower
drive belt doesnot stop within five (5) seconds, seeyour
dealer.
NOTE."Oncethe enginehas stopped, PTO switch must be
turned off, parking brakemust be engaged,and the ground
speed/steering control levers must be locked in the
NEUTRALposition after theoperator returns to theseat in
order to start theengine.
WARNING
If the unitdoesnotpassa safetytest, do notoperate
it. See yourauthorizeddealer. Underno
circumstance shouldyouattemptto defeatthe
purposeofthe safetyinterlocksystem.