Maintenance
MaintenanceSchedule& Procedures
Thefollowing schedule should be followed for normalcare of your rider and mower.You will needto keepa record of your
operatingtime. Determining operatingtime is easilyaccomplished by observing the elapsed time recorded by the hour meter.
SAFETYITEMS Before Every 5 Every25 Every 100 Every Spring &
Each Hours Hours Hours 200 Fall
Use Hours
CheckSafety Interlock System . .
CheckMower BladeStopping Time • •
RIDER MAINTENANCEITEMS Before Every 5 Every25 Every 100 Every Spring &
Each Hours Hours Hours 200 Fall
Use Hours
CheckRider/ Mower for loose hardware °
Check/ CleanEngineCooling Fins •
Check/ Adjust PTOClutch •
Lubricate Rider & Mower ** °
CleanBattery& Cables .
CheckTire Pressure .
CleanDeck& ChecWReplaceMowerBlades** .
CheckTransmission Oil •
ChangeTransmission Oil Filter ** •
ENGINE MAINTENANCEITEMS Before Every 5 Every25 Every 100 Every Spring &
Each Hours Hours Hours 200 Fall
Use Hours
CheckEngineOil Level •
Check/Change EngineAir Filter *
ChangeEngineOil & Filter *
Inspect Spark Plug(s) *
Check/ ReplaceFuelFilter *
* Referto engine owner's manual. Changeoriginal engine oil after initial break-in period.
** More often in hot (over 85° F:30° C)weather or dusty operating conditions.
26 www.snapper.com
To Next Page
Loading...
