11
STEERING ASSEMBLY
ITEM PART NO. DESCRIPTION
1 9-1315 WASHER, 5/16 Split Lock (2)
2 9-1297 NUT, 5/16-24 Hex, Grade 5 (2)
3 5-8078 WELDMENT, Steering Column
4 4-7106 COVER PLATE, Steering Column
5 4-6726 WELDMENT, Steering Shaft
6 1-0935 WASHER, 3/4” I.D. x 1-1/8” O.D. x 1/16” Thick Flat
7 1-0986 BEARING, Nylon
8 2-3671 COVER, Steering Shaft
9 7-2594 FOAM COVER, Steering Shaft (6-1/8” Long)
-- 2-3667 FOAM COVER, Steering Shaft (8-1/4” Long)
10 5-1941 ASSEMBLY, Steering Wheel (Includes Item 18)
11 9-0364 PIN, 5/32 x 1” Cotter (2)
12 1-3862 PIN, 1/4 x 1-1/2” Roll
13 4-6956 CABLE, Throttle
14 2-3655 KNOB, Throttle
15 7-1921 RIVET, Plastic Snap
16 9-0913 SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx) (8)
17 9-1601 NUT, 5/16-18 Hex Flange Lock, Grade 5 (4)
18 2-3781 LOGO, Snapper (Steering Wheel)
19 2-6343 SWITCH, Ignition
20 9-0880 WASHER, 5/8” Internal Tooth Lock
21 1-2685 NUT, 5/8-32 Special Hex
22 1-1138 KEY (Pair)
23 2-6196 BEARING, .75 I.D. PM Flange
24 7-6978 NUT, 1/4-20 Hex Nyloc (2)
25 9-1508 BOLT, 5/16-18 x 3/4” Short Neck Carriage, Grade 5 (4)
26 7-2137 DECAL, Steering Column
27 9-1495 SCREW, 1/4-20 x 3/4” Hex Head Cap, Grade 5 (2)
R. E. RIDER (HYDRO) SERIES 0 & 1 MANUAL No. 06123
To Next Page
Loading...
