21
HYDRO DRIVE & REAR WHEEL ASSEMBLIES
ITEM PART NO. DESCRIPTION
1 4-1854 TRANSMISSION, Hydro (Peerless P/N 205-043D)
2 7-2125 RELEASE LEVER, Hydro
3 7-2126 RETAINER, Release Lever
4 1-4241 WASHER, 1/4” I.D. x 1” O.D. x 1/16” Thick, Flat
5 9-0052 WASHER, 1/4” Split Lock
6 9-0099 BOLT, 1/4-28 x 1/2” Hex Head Cap, Grade 5
7 4-1985 STRAP, Torque
8 9-1523 BOLT, 5/16-18 x 5/8” Hex Washer Self-Tap (Swage)
9 5-7875 ASSEMBLY, Rear Wheel (Incl. Items 10, 11 & 12) (2)
10 4-5211 RIM, 16 x 7.50
11 1-2234 VALVE STEM
12 2-2584 TIRE, 16 x 7.50-8 Rear Turf
13 3-4453 WASHER, 3/4” I.D. x 1-1/2” O.D. x 1/8” Thick, Flat (4)
14 2-9617 WASHER, 3/4” I.D. x 1-5/16” O.D. 1/16” Thick, Flat (4)
15 2-9618 WASHER, Hub Cap Retaining (2)
16 1-7173 KEY, 3/16” Square x 2-1/2” Long (2)
17 2-9738 RING, 3/4” Retaining (2)
18 1-1022 HUB CAP (2)
19 9-1296 WASHER, .344 I.D. x 11/16 O.D. x 1/16” Thick Flat (4)
20 9-1511 NUT, 5/16-18 Hex, Grade 5 or B (4)
21 4-1853 BLOCK, Hydro Spacer (2) (Also shown on Page 6)
22 9-1058 SCREW, 5/16-18 x 3-3/4” Hex Head Cap (Also shown on Page 6)
23 1-1791 RETAINER, 5/16” Bolt (4) (Also shown on Page 6)
24 ----- ASSEMBLY, Hydro Cooling Fan (Peerless P/N 6025-P91)
25 ----- PULLEY, Hydro Drive
26 ----- SCREW (3)
27 ----- WASHER, Lock
28 ----- NUT
29 4-7117 BELT, Engine to Hydro (Also shown on Page 16)
30 9-1315 WASHER, 5/16 Split Lock
NOTE: Obtain parts 24 thru 28 from Peerless Gear
R. E. RIDER (HYDRO) SERIES 0 & 1 MANUAL No. 06123
To Next Page
Loading...
